FEATURES

• Provides communication to connect a PC or laptop to a vehicle OBDII system.
• Designed & manufactured by Plant Link S.L.
• Drivers available for: LabVIEW, LabWindows/CVI, Visual Basic, Visual C++
• Dimensions (width x length x height) = 72 mm x 114 mm x 33 mm
• RS-232 serial port connector: DB9 female
• I/O Communication Connector: DB9 male (use adaptor cable to convert to OBDII standard connector)
• Connects to the PC via the RS232 serial communication port.
• OBDII protocols available: CAN
• Suitable for: Some recent models and vehicles of the future
• Provides CAN communication up to 1 Mbps.
• CAN version = Full CAN 2.0B (CAN = Controller Area Network)
• Internal buffer holds a maximum of 100 messages in normal or extended identifier mode.